THE CAR

Chassis

Ford FG Falcon

CAMS approved rollcage

Aerodynamic body kit designed and tested by Ford Australia

Engine

5.0L Windsor V8 engine SVO cylinder heads with CNC milled porting and electronic fuel injection utilising a category controlled Motec engine management system.

Approx. 500 kW of power at 7500 RPM

Data Logging

Motec engine management and chassis data logging system. Motec electronic dash logger and display accepting sensor information from various inputs including steering, throttle, brakes, suspension and engine information Motec telemetry transmits engine/chassis/driver data

Gearbox

6-speed Sequential Holinger gearbox

Suspension

Front: Double wishbone designed for racing with adjustable camber. Cockpit adjustable front roll bar.

Rear: Location by four link parallel arms and Watts link. Cockpit adjustable rear anti roll bar.

Dampers

Coil over shock absorbers, also 4-way adjustable gas filled.

Brakes

Four wheel ventilated discs: 375mm front; 343mm rear. Alcon 6-piston front callipers and 4-piston rear. Cockpit adjustable front to rear bias.

Wheels

17 inch by 11-inch Forged Alloy

Tyres

Dunlop control tyre

Two compounds of slick and one compound of wet.

Fuel Capacity

75 Litre capacity with safety bladder.

V8 Supercars use an 85% ethanol fuel blended with 15% premium unleaded.

Vehicle Weight

1345kg(category minimum)

Top Speed

298kph (185mph): 0-100kph in 4.0 seconds